中文午夜乱理片无码,国产午夜精品一区二区三区极品,亚洲日本一区二区三区在线不卡 ,国产乱码日产精品bd,日本无码人妻精品一区二区蜜桃,精品人妻系列无码人妻在线不卡,国产成人精选视频在线观看不卡,午夜男女爽爽爽在线视频
Provide customers with high-quality precision equipment
A high-tech industry integrating R&D, production, sales and service of experimental equipment
What parameters should be considered when selecting a Shanghai Yetuo freeze dryer?
release time:2022-10-17  |  Browse:2532

1. Freeze dried area

The numbers in the model of Yetuo freeze dryer represent the freeze-drying area of that model of freeze dryer. Users should determine the required freeze-drying area based on their own needs through calculation. For example, if each batch of products requires a liquid volume of 1.8 kilograms (liters) to be freeze-dried, and materials are loaded onto material trays with a thickness of 10mm per tray, the load area of the freeze-drying board layer can be calculated as A (area, ㎡)=V (volume, m3)/H (height, m)=0.0018m3/0.01m/0.18 ㎡. Therefore, a freeze-drying machine with a board load area of 0.18 ㎡ needs to be selected.

2. Cold trap temperature

A cold trap is a device used in the freeze-drying process to capture water. In theory, the lower the temperature of the cold trap, the stronger its water capturing ability. However, a low temperature of the cold trap requires high refrigeration requirements, resulting in high machine and operating costs. The cold trap temperature of Shanghai Yetuo freeze-drying machine mainly has several levels such as -60 ℃ and -80 ℃. A freeze dryer with a cold trap temperature of around -60 ℃ is suitable for freeze-drying most products, while a freeze dryer with a cold trap temperature of -80 ℃ is suitable for freeze-drying some special products. The experiment on the effect of cold trap temperature on water capture capacity shows that when the cold trap temperature decreases from -35 ℃ to -55 ℃, the water capture capacity is significantly improved. When the cold trap temperature is below -55 ℃, the water capture capacity of the cold trap is not significantly improved. Therefore, in the absence of special requirements, choosing a cold trap temperature of around -60 ℃ is an ideal choice.

3. Cooling rate

The cooling rate reflects the refrigeration capacity of the refrigeration system. Under no-load conditions, the temperature of the cold trap should reach the minimum temperature specified in the index within 1 hour. For example, for a Yetuo freeze dryer with a cold trap temperature of ≤ -60 ℃, the machine should start timing from the start of refrigeration, and the time for the cold trap temperature to reach -60 ℃ should not exceed 1 hour.

4. Ultimate vacuum degree

The ultimate vacuum degree reflects the leakage situation of the freeze dryer and the pumping efficiency of the vacuum pump. The vacuum degree of the freeze-drying box used to be believed to be better with a higher vacuum degree, but now the view is that the vacuum degree should be within a reasonable range. The vacuum degree is too high, which is not conducive to heat transfer, and the drying speed actually decreases. However, the maximum vacuum degree of the freeze-drying box under no load should reach 2Pa or more.

5. Vacuum extraction time

The empty evacuation speed of the freeze-drying box should reach 2Pa from atmospheric pressure within half an hour.

6. Uniformity and flatness of plate temperature:

The uniformity and flatness of the layer temperature have a significant impact on the uniformity of product quality. The better the temperature uniformity and flatness, the better the uniformity of freeze-dried product quality. The temperature control of the freeze-drying machine shelf includes heater type and intermediate fluid type. The freeze-drying machine shelf with intermediate fluid control plate layer has good temperature uniformity and flatness. This freeze-drying machine plate layer is a hollow sandwich structure, and the cooling and heating of the plate layer are achieved through the circulation of the intermediate fluid in the fluid channel inside the plate layer, so the temperature of the plate layer is uniform and consistent. The shelf temperature control of the bell jar type freeze dryer basically uses heaters, and the consistency of the plate temperature is slightly poor. However, overall, the temperature difference between the layers of pharmaceutical lyophilizers should be controlled within ± 1.5 ℃, and the temperature difference inside the plates should be ± 1 ℃. Food lyophilizers can be appropriately relaxed.

7. Control system

The control system types and functions of Yetuo freeze-drying machines vary. For the experimental series of freeze-drying machines, they are mainly used for exploring the freeze-drying process of materials and small-scale trial production. Therefore, the control system should be able to display real-time freeze-drying process parameters and automatically record them; Set, modify, and effectively execute freeze-drying process procedures; Equipped with communication interfaces for easy data collection and storage.

7585b2b28e16caf6b1d810822a50759.jpg

Previous:Shanghai Yetuo Cover Freeze Drying Machine - Source of Cover Freeze Drying Technology     Next:Basic principle and experiment of lyophilizer
Follow us
Mobile station
  • Mobile:19961895916
  • Tel:19961895916
  • WeChat Account:上海葉拓科技
  • Email:yetuo@sh-yetuo.com
  • Address:C2-301, green window, No. 4, Lvdu Avenue
Copyright? 2025 Shanghai Yetuo Technology Co., Ltd  ICP備案號:滬ICP備20000740號-3 主站蜘蛛池模板: 亚洲呦女专区| 最新亚洲春色av无码专区| 精品国产午夜福利在线观看| 日韩国产图片区视频一区| 亚洲欧美成人精品香蕉网| 中文字幕乱码一区av久久| 欧美视频精品免费覌看| 久久99精品网久久| 免费无码va一区二区三区| 色五月激情五月亚洲综合| 亚洲色欲综合一区二区三区小说| 亚洲国产福利成人一区二区| 国产成人无码av在线播放不卡| 亚洲制服丝袜av一区二区三区 | 国产精品无卡毛片视频| 免费无码午夜理论电影| 日韩电影久久久被窝网| 亚洲国产成人精品福利| 婷婷丁香五月六月综合激情啪| 国产乱人伦偷精品视频aaa| 亚洲真人无码永久在线| 国产无遮挡又黄又爽不要vip网站| 亚洲国产精品综合久久2007| 天天拍夜夜添久久精品大| 国产麻豆亚洲精品一区二区| 亚洲成年看片在线观看| 日日av色欲香天天综合网| 国产在视频精品线观看| 欧美成ee人免费视频| 亚洲国产天堂久久综合网| 欧美性白人极品hd| 亚洲精品久久久久久久观看| 人妻少妇精品无码系列| 成年在线观看免费视频| 久久国产亚洲精品赲碰热| 人人做人人爽国产视| 国产成人av无码片在线观看| 国产伦子沙发午休系列资源曝光| 日韩中文字幕在线一区二区三区| 在线视频免费无码专区| 日本免费大黄在线观看|